MAIN CHARACTERISTICS
"INTERBUS" connectors allow to connect in network not only sensors and actuators but programmable logic controller too.
Extendable in operation.
360° shielded
Male and female plug fitted with a locking nut
9 contacts: 8 contacts Ø1 and 1contact Ø2 in the center.
Two of the contacts Ø1 are used for power supply conductors:
Contact N°7 :Positive polarity (+24V)
Contact N°8 : Negative polarity (+0V)
Contact n°6 (Ø 1) is reserved to the green /yellow conductor (Shield).
MAIN CHARACTERISTICS
|
Electrical characteristics |
|
|
|
Nominal voltage |
10 VDC £ Ue £ 50 VDC |
|
|
Max current rating Ø1 |
7.5A |
|
|
Max current rating Ø2 |
16A |
|
|
Flashover voltage between adjacent contacts Résistance between contact Ø1 |
³ 1100 V eff < 2MW |
|
|
Contact Résistance between contact Ø2 |
< 3MW |
|
|
Environmental conditions |
||
|
Protection class (I . P) |
I.P.67 |
|
|
Static temperature range Dynamic temperature range |
: –30° à + 70°C; –30° to + 70°C; –30° bis + 70° : –5° à + 70°C; –5° to + 70°C; –5° bis + 70° |
|
|
Spray |
||
|
Salt spray |
48 Hours |
|
|
Mechanical charactéristics |
||||
|
Mechanical life M23/M23 |
10000 locking cycles |
|||
|
Vibrations |
F:10 à 2000Hz |
|||
|
V:1 Octave/min |
||||
|
Acc:5g |
||||
|
Tightening torqueplug M23/M23: |
2N.m |
|||
|
Material |
||||
|
Moulded body M23 O-ring |
Fluorocarbon Fluorocarbon |
|||
|
Overmolding |
Thermoplastic elastomer |
|||
|
Plating |
Material |
Plating |
||
|
Plug body |
Brass |
Nickeled |
||
|
Contact |
Brass |
Gold over Nickel |
||
Cable type
Junction cable for fielbus systems (Certificated by the Interbus-club)
Straight male plug |
Straight female plug. |
|||||
