Jaeger Catalog Page 66

"MINEX" Series : Moulded connectors

- Contact arrangement:
(Refer to page 36) miniature series shell size 00 and 0.
- Contacts must be crimped on to the wire ends (Pages 47-48).

Number of contacts	Female receptacle	Male plug	Female cable connecting plug
3	6330 030 06	6331 030 06	6333 530 06
7	6330 070 06	6331 070 06	6333 570 06

Important : Tool part number 5971 041 06 is necessary for insertions and removal of contacts. (Pages 47-48).

SPARE CONTACTS

CAPS,GASKETS

Number of contact	Protection cap for receptacle	Protection cap for plug	Gasket for receptacle
3	6330 430 06	6333 430 06	6331 210 06
7	6330 470 06	6333 470 06	6331 240 06

(1 mm Dia.) USA size 20 removable contacts with gold plated finish.
Contact termination : crimped on to the wire ends (0.93 mm² max) AWG 18.
Adjustable crimping tool : Part. No. 5793 160 06 (Specification M 22520/2.01 and 2.02).
Material : Polyacetal - PVC.
Temperature range : (-40° C to+85° C)-40° F to+185° F (100 hours at (100° C) 212° F).
Maximum current rating : (1° C) 1.8° F x N contacts where I = 4 amperes.
(3° C) 5.4° F X N contacts where I = 7 amperes.
Contact resistance between pin and socket : < 0.0020 ohm.
Flashover voltage (mated connectors) : > 2.500 volts AC.
Working voltage :750 volts (RMS) max.
Proof voltage: 1.500 volts (RMS).
Breakdown voltage: 2.250 volts (RMS) min.
Coupling of the plug is provided by a knurled ring which screw on to the threaded shell of the receptacle.
Insolation resistance : greater than 5.000 megohms (Tested at 500 Volts D.C.).
Connector mating by screw coupling.

Dimensions: (mm) in.											Cable dia. for cable-clamp
Number of contacts	A	B	C	D	E	F	G	K	H	J	Male/Female plug and cable connecting plug
3	(41) 1.61	(14) .551	(21) .827	(19) .748	(12) .472	(2) .079	(16) .630	(16) .630	(21) .827	(21.4) .843	(3 to 5).118 to. 197 in.
7	(41) 1.61	(17) .669	(24) .945	(19) .748	(12) .472	(2) .472	(19) .630	(19) .748	(24) .945	(25.7) 1.01	(6 to 9) .236 to .354 in.