Page 63

MARINE" Series

SOCKETS, PLUGS AND CABLE CONNECTING PLUGS with 12,19,27 and 37 contacts (of 1 mm dia. contacts) USA size 20
(100 °C) 212 °F


Specification : (NF-EN 60529) I.P. 68

PART NUMBERS
PIN INSERT RECEPTACLES, SOCKET INSERT PLUGS, PIN INSERT CABLE CONNECTING PLUGS.

Dimensions: (mm) in.
Shell Size Number of contacts (1mm dia.) USA size 20 Pin insert receptacle Socket insert plug Pin insert cable connecting plug Protection caps for receptacle Protection caps for receptacle Cable dia. for cable-clamp Gaskets for receptacle
dia. mini dia. maxi
1 12 6370 120 06 6380 120 06 6390 120 06 6378 200 06 6388 200 06 (9) .354 (14) .551 5369 450 06
1 19 6370 190 06 6380 190 06 6390 190 06 6378 200 06 6388 200 06 (9) .354 (14) .551 5369 450 06
2 27 6370 270 06 6380 270 06 6390 270 06 6378 250 06 6388 250 06 (12) .472 (18) .708 5369 460 06
2 37 6370 370 06 6380 370 06 6390 370 06 6378 250 06 6388 250 06 (12) .472 (18) .708 5369 460 06



SOCKET INSERT RECEPTACLES, PIN INSERT PLUGS, SOCKET INSERT CABLE CONNECTING PLUGS.

Dimensions: (mm) in.
Shell Size Number of contacts (1.6mm dia.) USA size 20 Socket insert receptacle Pin insert plug Socket insert cable connecting plug Protection caps for receptacle Protection caps for receptacle Cable dia. for cable-clamp Gaskets for receptacle
dia. mini dia. maxi
1 12 6371 120 06 6381 120 06 6391 120 06 6378 200 06 6388 200 06 (9) .354 (14) .551 5369 450 06
1 19 6371 190 06 6381 190 06 6391 190 06 6378 200 06 6388 200 06 (9) .354 (14) .551 5369 450 06
2 27 6371 270 06 6381 270 06 6391 270 06 6378 250 06 6388 250 06 (12).472 (18) .708 5369 460 06
2 37 6371 370 06 6381 370 06 6391 370 06 6378 250 06 6388 250 06 (12) .472 (18) .708 5369 460 06

NOTE : Tool, Part. No 5971 040 06 is necessary, for inserting and extracting contacts.

OPERATING TEMPERATURE

(-40 °C to +100 °C) -.40 °F to +212 °F (500 hours at (100 °C) 212 °F) (-55 °C to +200 °C)-67 °F to +392 °F (500 hours at (200 °C) 392 °F) (Consult our sales engineering office).

CONNECTOR COUPLING SYSTEM

Coupling of the play by a knurled ring which screws on to the threaded shell of the receptacle.
DURABILITY : No damage after 1,000 engagements and disengagements, as in service.

Important : Maximum tightening torque to be effected to optimize immersion characteristics (300 N. cm).

INSTALLATION,

DIMENSIONS (refer to page 62)