Jaeger Catalog Page 62

Page 62

"MARINE" Series

MATERIAL NON-FERROUS ALLOY (ARCAP)
I.P. 68

Specification : (NF-EN 60529) I.P. 68.
Pressure: mated connectors
Use : 10 bar (test : 15 bar)
Maximum depth of 325 ft.

MAIN FEATURES

The Marine series is composed of a range of a very high mechanical performance waterproof connectors strictly protected from "Sea water" and "Saline atmosphere".

CONTACTS

Pin or socket of (1 mm dia.) US size 20, of (1.6 mm dia.) US size 16, of (2.4 mm dia.) US size 12 are removable and carry a gold plated finish (UTE-C 93-422).

CONTACT TERMINATION

Contact may be either crimped or soldered on to the wire ends. Adjustable crimping tool : (specification : M 22520-1/01 and M 22520-1 02) PART NUMBER : 5794 810 06.

	(1 mm dia. cont.) USA size 20	(1.6 mm dia. cont.) USA size 16	(2.4 mm dia. cont.) USA size 12
Max. cross section area for soldered wires	(0.60 sq. mm) AWG 20	(1.50sq.mm)AWG16	(3.18 sq. mm) AWG 12
Max cross section area for crimped wires	(0.93sq.mm)AWG18 (2.1 mm dia.)	(0.6 to 1.5 sq. mm)AWG 20 to 16	(1.34 to 3.18 sq. mm) AWG 16 to 12
Maximum insulated wire diameter	(2.1 mm dia.) .083 dia. cont.	(2.7 mm dia.) .106 dia. cont.	(3.5 mm dia.) .138 dia. cont.

ELECTRICAL DATA

Contact resistance between pin and socket :

(1 mm dia. contacts) U.S.A. size 20 : less than 0.0020 ohm.
(1.6 mm dia. contacts) U.S.A. size 16 : less than 0.0015 ohm.
(2.4 mm dia. contacts) U.S.A. size 12 : less than 0.0010 ohm.

The maximum current rating will be determined by the number of contacts carrying the current and by the receptacle increase in temperature. If a number N of contacts, carry a continuous lead I the rise in temperature of the connector will approximatively be as follows:

(1 mm dia. contacts) USA size 20	(1.6 mm dia. contacts) USA size 16	(2.4 mm dia. contacts) USA size 12
(1°C)1.8°F x N where I= 4amp. (3° C) 5.4° F x N where I = 7amp.	(< 1° C)< 1.8° FxN where I = 4amp. (2° C) 3.6° F x N where I = 7amp. (10° C) 18° F x N where I = 15amp.	(<1°C)<1.8°F x N where I = 7amp. (2° C) 3.6° F x N where I = 12amp. (10° C) 18° F x N where I = 30amp.

Flashover voltage at (20 °C) 68 °F (mated connectors)

	(1 mm dia. cts) 4, 19 or 37 cts USA size 20	(1 mm dia. cts) 3, 7, 12, 19, 27 or 55 cts USA size 20	(1.6 mm dia. cts) USA size 16	(2.4 mm dia. cts) USA size 12
at sea level greater (r.m.s.)	> 2,000V (r.m.s.)	> 2,500V (r.m.s.)	> 2,500V (r.m.s.)	> 2,500V (r.m.s.)
at 56 mm Hg (66,000 feet)	> 400V (r.m.s.)	> 500V (r.m.s.)	> 500V (r.m.s.)

Insulation resistance : greater than 5,000 megohms. (Tested at 500 Volts D.C.).

DIMENSIONS: Dimensions: (mm) in.

Shell size	Mated assembly		RECEPTACLE							PLUG
Shell size	A	C	D	E	F	G	H	J	K	L	N	O	P	R
1 2	(75) 2.95	(4) .157	(21) .827	(27) 1.06	(3.2) .126	(28) 1.10	(23) .905	(2) .078	(12.5) .492	(70) 2.76	(29) 1.14	(26) 1.02	(24) .945	(2.5) .098
2	(84) 3.30	(4) .157	(27) 1.06	(32) 1.26	(3.2) .126	(34) 1.34	(23.5) .925	(2) .078	(12.5) .492	(78) 3.07	(36) 1.42	(32) 1.26	(30) 1.18	(3) .118

Dimensions