Page 59
POLARIZATION for "INDUSTRIAL" Series
SOCKETS, PLUGS AND CABLE CONNECTING PLUGS WITH 3-4 -7-12-19 OR 27 CONTACTS
(1.6 mm dia. contacts) U.S.A. size 16
POLARIZATION :
This provided
- Either by the position of the secondary Keys in relation to the main Key
- or by a shift in the insulator angle in the casing (this shift or rotation is in a clockwise direction for the male connector and in the opposite direction for the female connector).
PART NUMBERS:
For the procurement of types "02" "03" and "04"
use "NORMAL" type part numbers on page 51
followed by variations 02, 03, or 04. e.g. : male socket, part No. 6306
030 06 in "NORMAL" type becomes 6306 030 26 for "02" type.
IDENTIFICATION:
For easier identification ot the connectors when wiring and locking the connector onto its socket, the socket bushes, the extension bushes and the locking ring of the connectors are identified by the "FIGURE" matching the type of locating pin pattern adopted (02, 03 or 04).
ACCESSORIES:
The connection accessories for protection and fixing of the contacts for thermocouples,
the tools for fitting and removing the contacts are the same as the "NORMAL"
type connectors on page 51.
USE - INSTALLATION
(page 43)
OVERALL DIMENSIONS
(page 43)
