| Shell Size | Number of contact | (1) Complete pin isert receptacle | Complete socket insert plug + cable-clamp (refer to page 37) | Accessories (page 46) Cap for receptacle |
| 00 | 3 | 5332 350 06 | 5332 320 06 and 5303 310 06 |
5336 100 06 |
| 00 | 7 | 5332 750 06 | 5332 720 06 and 5303 710 06 |
5336 500 06 |
Air leakage : When checked by a mass spectrometer, leak rate is less than
10-9/ATM./CU.CM/SEC.
Test : NF-C 20 717 - (International specification : CEI 68.2.17).
Electrical data
Contact resistance between pin and socket (mated contacts) : less than 0.002 ohm
Maximum current rating : 7 amperes
Flashover voltage at standard conditions : more than 2000 volts
Operating temperature range : (-25° C to + 100° C) - 13° F to + 212° F [(100° C) 212° F for 100 hours]. For higher temperature applications, please consult our Sales Engineering Office.
Contact Arrangment (page 36)
Connections : The contacts are not removable and should be soldered on to the wires. Maximum wire area : (0.6 sq mm.) 20 AWG
Coupling : will mate with those socket insert plugs of the MINIATURE Series which conform to page 37.
Panel opening : The receptacle mounts in the same mounting hole as the round flange receptacles (page 38).
The shell, locknut and lockwahser are nickel plated. The contacts are gold plated.