Page 13

STANDARD" Series, hermetic,

LEAK RATE, LESS THAN 10^/ATM./cu.cm/sec. THRU-BULKHEAD RECEPTACLES, PIN INSERT (100° C) 212° F

Available with 3-6-12 or 17 contacts PART NUMBERS
  (1) (2) Accessories
Shell size contact Complete thru-bulkhead receptacle  Replacement parts
   Protection cap "O" ring seal Locknut Lockwasher
1 3 5331 030 06 5369 100 06 5364 400 06 5364 460 06 5364 430 06
1 6 5331 060 06 5369 100 06 5364 400 06 5364 460 06 5364 430 06
2 12 5331 120 06 5369 110 06 5364 410 06 5364 470 06 5364 440 06
3 17 5331 170 06 5369 120 06      

(1) The receptacle is shipped with an "0" ring seal, locknut and lockwasher.
(2) The accessories "O" ring seal, locknut and lockwasher can be supplied seperately upon request.

FEATURES - INSTALLATION

- Operating temperature : (- 25°C to + 100°C) -13°F to+212°F (500 hours at (125°C) 257°F). Beyond these limits, consult our Sales Engineering Office.
- For use with two socket insert plugs of the "STANDARD" or "WEATHERPROOF" series. Choice is determined in accordance with prevalent operating conditions.

CAUTION

As the thru-bulkhead receptacle carries pin contacts on both sides, the identification number for the same conductor can differ between the two socket insert plugs coupled to this receptacle. Refer to the illustrations below to establish the relevant relationship.