Page 4

MOUNTING DATA


"STANDARD" - "RAPID" And "WEATHERPROOF" Series


Both front and back of plug and receptacle inserts have numbers for easy contact identification.
Solder assembly of the wires
to the contacts (after removal of the plug shells).
(2 mm) .079 dia. contacts - well size : (1.50 mm) .059 dia. - Max. wire cross section area :(1.34 sq. mm) 16 AWG
(3 mm) .118 dia. contacts - well size : (2.30 mm) .090 dia. - Max. wire cross section area :(3.39 sq. mm) 12 AWG
(4 mm) .157 dia. contacts - well size : (3.90 mm) .154 dia. - Max. wire cross section area : (6 sq. mm) 10 AWG

CAUTION


- Use no acid for stripping.
- Thoroughly clean contacts after soldering using a brush dipped in a suitable solvent.
- Ensure that the solder has not overflowed.
- Place a length of sleeving over the soldered connection.

Receptacle mounting : either from the front of the unit box, or from the rear (with the threaded barrel only protruding). In both cases, the wall cut-out is identical. In the latter case, the maximum wall thickness should not exceed (4 mm) .157 and the receptacles should be secured with countersunk head screws.

Accessories : All the plugs available in the "Standard" and "Rapid" series have three separate identical cable entries which may be used simultaneously. These entries are splayed to facilitate cable convergence and each can receive one bushing, cable clamp or adapter for flexible conduit. Unused entries are sealed with blanking plates supplied with the plug.

Threaded protection caps can be supplied to protect unused plugs and receptacles.

APPLICABLE SPECIFICATIONS


The JAEGER electrical connectors meet certain requirements of the following specifications :

French Specifications
AIR : 8464 - 511 - 520 - 521 - 711 - 712 - 713 - 715 - 763
NF.C 20-700. International Specification : CEI 68-1
STCAN: 543 558

U.S. Specifications
MIL-C-5015

NATO CODE NUMBERS


Part No. NATO Code No. Part No. NATO Code No. Part No. NATO Code No.
0383 220 06 5935-14-2180897 5320 080 06 5935-14-2574491 5329 980 06 5975-14-2561071
0383 510 06 5935-14-2180899 5320 120 06 5935-14-2325586 5332 330 06 5935-14-2359207
0383 550 06 5935-14-2147628 5320 800 06 8030-14-2702113 5360 030 06 5935-14-2247969
0383 560 06 5935-14-2186681 5321 040 06 5935-14-2729213 5360 040 06 5935-14-2325579
0383 590 06 5935-14-2180901 5322 120 06 5935-14-2809058 5360 060 06 5935-14-2325580
0383 820 06 5935-14-2169978 5322 250 06 5935-14-2359578 5360 080 06 5935-14-2574806
0425 470 06 5935-14-2146986 5323 530 06 5935-14-2385088 5360 120 06 5935-14-2325581
0429 370 06 5935-14-2167199 5323 580 06 5935-14-2385089 5363 580 06 5935-14-2578979
0429 400 06 5935-14-2167198 5324 010 06 5935-14-2796643 5366 030 06 5935-14-2848890
0429 430 06 5935-14-2167197 5324 150 06 5935-14-2729214 5366 040 06 5935-14-2729216
0429 530 06 5935-14-2169981 5324 170 06 5935-14-2566410 5366 060 06 5935-14-2247970
0429 540 06 5935-14-2169980 5324 230 06 5935-14-2790506 5366 080 06 5935-14-2515627
0429 550 06
5935-14-2146117 5324 320 06 5935-14-2729215 5366 120 06 5935-14-2515608
0429 560 06 5935-14-2146119 5324 770 06 5935-14-2566411 5366 170 06 5935-14-2823355
0429 770 06 5935-14-2169979 5326 060 06 5935-14-2539580 5366 250 06 5935-14-2539581
0429 860 06 5935-14-2180898 5326 080 06 5935-14-2515626 5366 350 06 5935-14-2793635
0429 900 06 5935-14-2169977 5326 120 06 5935-14-2515609 5369 100 06 5935-14-2368308
0430 010 06 5935-14-2180900 5326170 06 5935-14-2823354 5369 110 06 5935-14-2637131
0430 820 06 5935-14-2180896 5326 250 06 5935-14-2539579 5369 120 06 5935-14-2637129
0430 850 06 5935-14-2146118 5326 560 06 5935-14-2589655 5369 130 06 5935-14-2539914
5304 950 06 3040-14-3034044 5328 940 06 5935-14-2823356 5369 140 06 5935-14-2637130
5305 020 06 5935-14-2325584 5329 000 06 5935-14-2147383 5369 350 06 5935-14-2642162
5320 030 06 5935-14-2247967 5329 400 06 5935-14-2212031 5369 450 06 5330-14-2589344
5320 040 06 5935-14-2325582 5329 600 06 5935-14-2468751 5369 460 06 5330-14-2729212
5320 060 06 5935-14-2325583 5329 700 06 5970-14-2800466 5971 040 06 5120-14-2478227


NOTE : This list cannot be revised regularly. For information on the new numbers assigned, please consult our Sales Engineering Office.